-Advertisement-
  About AE   About NHM   Contact Us   Terms of Use   Copyright Info   Privacy Policy   Advertising Policies   Site Map
   
Custom Search of AE Site
spacer spacer



Box 14

GEL BOXES: Be sure to MATCH LID# with APPROPRIATE BOTTOM#!!!
   1. Rinse all trays and gel boxes. Dry outside of boxes with paper towels.
       Do not use towels on the inside of gel box. AIR DRY ONLY so you won't damage platinum wires.
   2. Place a casting tray (gates secured down) and 6-well comb in each gel box. comb in each gel box .
   3. Be sure to MATCH LID# with APPROPRIATE BOTTOM#!!! !!! This is to protect gel boxes.
   4. Place gel boxes w/trays in large Ziploc bags, red lead up.
   5. Pack EXACTLY as diagrammed on Packing Guide in box.
   6. Send broken gel box or tray to Canada in Box A, B, or C. Include a filled-out "repair" form.
 
POWER SUPPLIES:
   1. Wipe down power supplies with damp paper towels. Place in large Ziploc bag.
   2. Pack as shown in packing diagram.
   3. Send broken power supply to Canada. Include a filled-out a "Repair" form.
 
ITEM AMOUNT SENT RCVD ALERT/comments
Casting trays 10 ea      
Combs, 6-tooth 10 ea      
Gel boxes, in protective bags 10 ea      
Power Supplies 5 ea      
Cords for Power Supplies (in bag) 5 ea      
Packing Diagram 1      



Overview     Alphabetized List

Box 1     Box 2     Box 3     Box 4     Box 5     Box 6     Box 7

Box 8-13     Box 14     Box 15     Box 16-22     Box A-F     Box MV




AE Partners Collection Index


Activities Exchange Index


 
Custom Search on the AE Site

 

-Advertisement-